FM光纤直放站远端机 FR-100 CE
Product Description
The FM Fiber Optic Repeater is designed to solve problems of weak mobile signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.The system consists of two parts: Master Unit and Remote Unit. The Master unit captures the BTS signal via Donor antenna of FM Repeater to BTS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where signal coverage is inadequate.
Features
Ø Rack mounted 2U chassis, easy to install, with good heat dissipation
Ø Adopting digital optical module technology for low transmission loss and long distance.
Ø Modules structure, dual-port design, and built-in power supply, easy for maintenance and installation;
Ø Support optical loop and optical side functions, increase device stability, and reduce optical path failure issues.
Ø One Donor Unit can support up to 24 Remote Units to maximize utilization of fiber optic cable
Applications
To expand signal coverage or fill signal blind area where FM signal is weak or unavailable.
Ø Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages
Ø Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots
Technical Specifications
| Item | Specifications |
| Frequency Range | 87.5-108MHz |
| Bandwidth | 20.5MHz |
| Max RF Output Power | 43dBm±1dB |
| Max Gain | 50dB±2dB |
| Gain Adjust Range & Step | 31dB,1dB Step |
| Noise Figure | ≤5dB |
| Group Delay | ≤6μs |
| In-band Ripple | ≤3dB |
| Intermodulation attenuation | ≤-20dBc@16CH |
| Spurious Emission |
≤-36 dBm /30kHz at 9kHz-1GHz ≤-30 dBm /1MHz at 1G-12.75GHz |
| VSWR | ≤1.5 |
| Impedance | 50Ω |
| RF Connector | N-Female |
| Fiber Connector | FC/PC*2 |
| Fiber Mode | Single mode |
| Total Optical Power | -3dBm±3dB (Total) |
| Optic Input Power of Remote | ≥-15dBm |
| Optical loop | support |
| Operation Temperature | -25~+55°C |
| Relative Humidity | ≤95% (Non Condensing) |
| Power Supply | AC 220V 50/60Hz |
| Weight | ≤ 19Kg |
| Dimensions | 480*375*180mm |
| Power Consumption | ≤350W |
| Protection level | IP65 |
| Monitor | Local / Remote monitoring :RJ45 |
| Marking | CE, SRRC |
| Standards | EN 62368; EN 301 489-1 /EN 301 489-5; EN 303 758 |